अपनी प्राथमिकता निर्धारित करें
फ़ॉन्ट स्केलिंग
अप्राप्ति
पृष्ठ अनुमापन
अप्राप्ति
रंग समायोजन
भा.प्रौ.सं.कानपुर
IITK

Engine Research Laboratory has a Turbocharged CRDI Engine Test Cell of SUV Tata Safari DICOR 2.2 L, which is EURO IV compatible diesel engine. This test cell is used for comprehensive investigations of effect of fossil fuels as well as biofuels on the engine performance, emissions and combustion characteristics in addition to studies of long-term engine durability and lubricating oil degradation. The engine is coupled with an eddy current dynamometer (Dynomerk: EC300) for controlling the engine speed and load. 

संपर्क व्यक्ति

  • Dr Avinash K Agarwal, FSAE, FASME
    Department of Mechanical Engineering
    Indian Institute of Technology Kanpur
    Kanpur-208016 India
    Home Page: www.iitk.ac.in/erl
    Tel: +91 512 2598682 (Res)
    Fax: +91 512 2597982, 2597408 (Off)
  • +91-512-259-7982

प्रवेश प्रक्रिया:

Contact Prof. Avinash Kumar Agarwal
 

आयोजन स्थल:

Engine Research Laboratory, IIT Kanpur

समय:

Contact Prof. Avinash Kumar Agarwal

संपर्क सूचना:

Engine Research Laboratory
Department of Mechanical Engineering
IIT Kanpur, Kanpur-208016
Tel: +91 512 2597458 (Lab)

Specifications of the Test Engine

 

Make/ Model

Tata/ Dicor 2.2L (BS-IV/ Euro-IV)

Engine Type

16 valves, Water cooled, CRDI, Turbocharged, and Intercooled Diesel Engine with Exhaust gas recirculation system.

No. of cylinder

4, In-line

Valve Mechanism

DOHC

Bore/Stroke

85 mm x 96 mm

Cubic Capacity

2179 cc

Max. Engine Output

103 KW at 4000 rpm

Maximum Torque

320 Nm at 1700-2700 rpm

Compression ratio

17.5

Firing order

1-3-4-2

FIE System

CRDI with 1600 bar max fuel injection pressure

Fuel filter

Single stage fuel filter

Fuel Injection Pump

High Pressure Pump

Timing and Governing

ECU control

Specification of Eddy Current Dynamometer

 

Make/ Model

Dynomerk/ EC-300

Capacity

220 KW @ 2500-8000 rpm

Maximum Speed

8000 rpm

Maximum Torque

702 Nm

Direction Of Rotation

Bi-directional

RPM Accuracy

±1 rpm

Special Features of the Engine Test Cell

  • Centralized injectors.
  • ECU controlled fuel injection system.
  • Higher injection pressure (1600 bar).
  • Variable Nozzle Turbine (VNT) turbocharger.
  • Gallery cooled pistons.
  • Hydraulic lash adjusters and roller followers for maintenance-free quiet operation and reduced friction.
  • The engine breather/ oil separator, to eliminate the engine blow-by being emitted to atmosphere.
  • The DICOR engine uses DELPHI high-pressure pump and a common rail for supplying the cylinders with high pressure fuel through ECU controlled fuel injectors.
  • Common–rail is key to better fuel engine performance, since more accurate high pressure injection results in more efficient combustion.
  • SAFARI DICOR has “Drive-by-wire” technology, where-in Driver demand translation is done by the ECU.
  • ECU commands the injectors for pilot injection, which helps reduce instantaneous combustion, thus reducing traditional diesel ‘Knock’.
  • As a consequence, DICOR engine has far less noise, vibration and harshness, which is conventionally associated with DI diesel engines.
  • SAFARI DICOR is equipped with fuel filter and water separator (Sedimenter with water sensor) designed to filter out external particles and separate water from the fuel.
  • EGR system to tap a part of exhaust gas and mix with intake air at part load conditions thus reducing the harmful NOX pollutants.
  • EGR quantity and its duration are controlled by ECU instantaneously, based on environmental as well as engine conditions.
  • Close coupled catalytic converter (CCC) fitted with diesel oxidation catalytic (DOC) converter to reduce exhaust emissions (CO, NOX, HC and PM).
  •  CCC quickly heats up after start of the engine, to ensure that it operate correctly during the engine warm-up phase.
  • These features of engine components and after-treatment technology make this engine EURO IV compatible.